THE UNIVERSAL ADHESIVE DOESN'T EXIST.
TRIALS ARE ALWAYS RECOMMENDED

Rubber Based Adhesives

PERMANENT - Rubber Based
Temperatures performances can vary depending on face material.

MP 747 DISCONTINUED

REPLACED BY MP 710N

 Versatile permanent adhesive combining all purpose properties with a good initial tack.

It is suitable for use on a wide variety of substrates and enables optimum converting speeds for regular shapes of labels.

Applic. T°
Service T°
+ 10 °C
- 20 to + 70 °C

Technical Data Sheet (PDF format) :

MP 505 DISCONTINUED

REPLACED BY MP 710N

 Permanent adhesive with wide versatility.

Good resistance to low temperatures and excellent adhesion on polyethylene.

MP 505/0 : Opaque version.

Applic. T°
Service T°
- 5 °C
- 30 to + 60 °C
Technical Data Sheet (PDF format) :

MP 450

 Permanent adhesive with good cohesive properties.

Used with synthetic face materials (except clear) and for application on non-polaric substrates (polyethylene and polypropylene).

Applic. T°
Service T°
+ 10 °C
- 20 to + 70 °C
Technical Data Sheet (PDF format) :

MP 710N

 Unique Permanent adhesive that has been developed as an answer to both printers and end users requirements to give high initial tack and adhesion over a wide range of surfaces.
MP 710N performs well on difficult surfaces including polyethylene and polypropylene
Technical Data Sheet (PDF format) :
  • Papers
Applic. T°
Service T°
- 5 °C
- 30 to + 60 °C
Applic. T° *
Service T°
0 °C
- 30 to + 60 °C

Tyre Labelling

 Permanent adhesive that has been specially developed for applications on rubber.
Applic. T° *
Service T°
+ 15 °C
- 30 to + 60 °C

*Temperature : Performances can vary depending on the substrate and the front material. Check details on the technical data sheet.
Technical Data Sheet (PDF format) :

 

Acrylic Based Adhesives

PERMANENT - Acrylic
Temperatures performances can vary depending on face material.

MP 196

 General purpose, permanent emulsion based adhesive.

Covers a large range of applications, with special emphasis on general purpose labelling onto a broad selection of substrates.

Applic. T°
Service T°
+ 5 °C
- 15 to + 90 °C
Technical Data Sheet (PDF format) :

MP 199

 Permanent emulsion-based adhesive with high adhesion and tack properties. Good adhesion on non-polar and difficult substrates. Suitable for high converting speeds achieving optimal dispensing.
Applic. T°
Service T°
+ 5 °C
- 10 to + 80 °C
Technical Data Sheet (PDF format) :

MP 244 DISCONTINUED

 General purpose emulsion-based acrylic permanent adhesive with a good initial tack and ultimate adhesion on most common substrates.

Particularly adapted for high converting speeds and allows big series of end use printing in laser printers and photocopiers.

Applic. T°
Service T°
+ 5 °C
- 15 to + 80 °C
Technical Data Sheet (PDF format) :

MP 125 S

 General purpose emulsion-based acrylic permanent adhesive with a high initial tack and ultimate adhesion on most common substrates.

Particularly adapted for high converting speeds.

Applic. T°
Service T°
+ 5 °C
- 15 to + 80 °C
Technical Data Sheet (PDF format) :

MP 128 N

 Permanent acrylic, emulsion based adhesive with a high adhesion and tack properties.

Specially developed for polyolefinic films (MACthene and MACpropy) for application on non polaric substrates.

Very good dispensing ability.

Applic. T°
Service T°
+ 5 °C
- 10 to + 80 °C
Technical Data Sheet (PDF format) :

MP 312

 Permanent acrylic adhesive, transparent and non-staining with high ultraviolet and weathering resistance.

Used for applications requiring good transparency and good heat resistance.

Applic. T°
Service T°
+ 10 °C
- 20 to + 150 °C
Technical Data Sheet (PDF format) :

MP 499

 Permanent acrylic adhesive with very high adhesion properties.
Applic. T°
Service T°
+ 10 °C
- 40 to + 90 °C
Technical Data Sheet (PDF format) :

MP 318

 Clear permanent acrylic adhesive with high ultraviolet and weathering resistance.

Non staining and optical clarity.

Good resistance to chemicals and heat.

Applic. T°
Service T°
+ 0 °C
- 20 to + 130 °C
Technical Data Sheet (PDF format) :

MP 318 UV

 Clear permanent acrylic adhesive with high ultraviolet and weathering resistance.

Optical clarity — bluish shade — enabling the detection of missing labels with UV light.

Applic. T°
Service T°
+ 0 °C
- 20 to + 130 °C
Technical Data Sheet (PDF format) :
MI 465 Permanent acrylic adhesive with high resistance to plastisizers and good cohesion. MI 465 offers excellent adhesion properties and cohesive strength with inherent resistance to stringing allowing excellent convertibility and is suitable for a sterilization process in standard conditions (130°C sterilizer)
Application T° +10 ° C Service T° -40 to + 80°C
Technical Data sheet (PDF )
PERMANENT Permanent acrylic adhesive with high ultraviolet and weathering resistance. Good resistance to chemicals and heat . The adhesive offers excellent adhesion properties and cohesive strength, with inherent resistance to stringing allowing excellent convertibility.

Application T° + 5°C Service T° -40°C to + 140°C
Technical Data sheet

PERMANENT DEEP-FREEZE - Acrylic

MF 132

 Permanent acrylic, emulsion based adhesive developed for use at low to very low temperatures.

Specially developed for labelling at actual refrigerator temperatures or onto food packaging before deep-freeze conditions.

Applic. T°
Service T°
- 20 °C
- 45 to + 60 °C
Technical Data Sheet (PDF format) :

 

REMOVABLE - Acrylic
Temperatures performances can vary depending on face material.

MR 101

 Emulsion acrylic removable adhesive.

Particularly adapted for high converting speeds.

Applic. T°
Service T°
- 5 °C
- 20 to + 80 °C
Technical Data Sheet (PDF format) :

MR 180

 Emulsion Acrylic removable adhesive
Applic. T°
Service T°
+ 5 °C
- 20°C to + 50 °C
Technical Data Sheet (PDF format) :

MR 980

 Solvent acrylic removable adhesive.

Particularly adapted for high converting speeds.

Applic. T°
Service T°
- 20 °C
- 40 to + 80 °C
Technical Data Sheet (PDF format) :

FOR DIRECT FOOD CONTACT - Acrylic

FA 103

 Emulsion acrylic adhesive.

For direct contact with meat and fatty foodstuff.

Applic. T°
Service T°
+ 5 °C
- 15 to + 60 °C
Technical Data Sheet (PDF format) :